Airlink101 AWLL4030 Uživatelský manuál

Super G Wireless USB 2.0 Adapter Model # AWLL4030 User’s Manual Ver. 1A

10 Step 10 Read the notes carefully and click Next. Step 11 Verify Atheros Client Utlity and Supplicant is selected and click Next. Step 12 Click

11 Step 14 Click Continue Anyway at the Windows Logo prompt for the Wireless Network Adapter (Click Yes for Windows 2000). Step 15 Click OK to re

12 3. Configure USB Adapter The following steps are for Windows 98SE/ME/2000/XP. If you already have signal strength and valid IP address, you do

13 Step 3 Select the Default profile and click Modify. Step 4 Enter the SSID (Network Name) that your wireless router/access point is using in th

14 Step 5 Return to the Current Status tab and verify that you have signal strength and valid IP address. If your wireless router/access point h

15 4. Configure Client Utility The Client Utility is a user-friendly utility designed to configure the wireless settings of the USB Adapter as well

16 4.2 Profile Management The Profile Managment tab allows you to add and edit profiles for your USB Adapter. Profiles are used to save various set

17 Order Profiles Including a profile in the auto selection list allows the Adapter to automatically select that profile from the list and use it to

18 4.3.2 Security By default, wireless security is turned off. To enable encryption, select the appropriate security option fro

19 To enable WPA encryption, select WPA Passphrase from the list and click Configure. Enter a Passphrase between 8 and 64 charac

2 Table of Contents 1. Introduction ... 3 1.1 Feature

20 To enable WEP encryption, select Pre-Shared Key (Static WEP) from the list and click Configure. Enter the appropriate WEP key

21 Key Button Description Key Entry Determines the entry method for an encryption key: hexadecimal (0-9, A-F), or ASCII text (all keyboard charact

22 4.3.3 Advanced The Advanced tab allows you to fine-tune the Adapter’s wireless settings. Transmit Power Level: Use the drop-

23 4.4 Diagnostics The Diagnostics tab provides a list of the Adapters statistics. Parameter Description Adapter Information The

24 5. Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click o

25 Step 3 Expand Network adapters from the list and verify that Atheros USB 2.0 Wireless Network Adapter is listed and no yellow question mark is be

26 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theor

3 1. Introduction Thank you for purchasing the Super G Wireless USB 2.0 Adapter. This USB Adapter is designed to comply with IEEE 802.11g Wireless

4 • LED: Link/Activity • Transmit Power: 16dBm (Typical) • Dimension: 9(H) x 27(W) x 87(D) • Temperature: 32~131°F (0 ~55°C) • Humidity: 0-95%

5 2 Installation 2.1 Installation for Windows 98SE/ME The following steps are for Windows 98SE/ME Note: Do not insert the USB Adatper into the co

6 Step 6 Click Yes to acknowledge the need for a reboot after the installation. Step 7 Click Next to accept the default Destination Folder. Step 8

7 2.2 Installation for Windows 2000/XP The following steps are for Windows 2000/XP. For Windows 2000/XP, you must update your USB driver to USB 2.

8 Step 4 Click Next at the welcome screen. Step 5 Click Next to accept the License Agreement. Step 6 Verify Install Client Utilities and Driver

9 Step 7 Click Yes to acknowledge the need for a reboot after the installation. Step 8 Click Next to accept the default Destination Folder. Step